Application briefs

Simple application

Phoenix enzyme cleaner into glassy carbon

Filling 1 bag of (20 gr) Phoenix enzyme cleaner into a sprayer

Well, 1 litre of a hot water (60-80 degree fill up, sprayer lock)
shake ready. The dosage can vary depending on pollution degree.

Letting rinsing solution spray on and have an effect fine on the area to be cleaned.
Soaking time: A couple of seconds up to 5 minutes - depending on a pollution way and-
degree.
Relieve of dirt with a suitable aid (e.g. micro fibre cloth or sponge.) 
with clear water after-sink units or with a damp cloth after clean.
Cleaned area dries independently.

You recommend at high-grade steel and synthetic material, the cleaned areas
removing with a clean, easily damp micro fibre cloth extensively.
This way one gets a stripe free surface.

Notes:
The Phoenix enzyme powder must be activated with hot water, the application
of course the rinsing solution can be carried out also in cold condition. The rinsing solution
is after for min. 48 hours mix actively. After that the cleaning effect flags slowly.
After cleaning there are materials like in accordance with e.g. rubber seals
the manufacturer recommendations cultivate.

Productiveness:
Being able to be prepared up to 100 litres very effective rinsing solution with a kg of Phoenix enzyme powder.
The dosage can vary between 10 and 20 grams per litre of water depending on pollution degree.
We recommend our pressure sprayer:
High productiveness - optimal results 1.4 litres of contents easily operable, robust, swivelling spray-head made of synthetic material with brass nozzle, adjustable lying inside of spot beam to fine pulverization.

Phoenix enzyme cleaner is freely of surfactants a universal cleaner
Biologically degradable and sewage neutral,
not muffling, not etching poisonously not.